ART Tube MP Microphone Preamp (Model 127)
The Tube MP is the world's most popular external tube microphone preamp. Whether you're working with a 4-track, hard-disk, or digital multi-track recorder, the Tube MP's TEC award nominated design will allow you to obtain professional recording studio results at a fraction of the cost of comparable equipment. The hybrid design of the Tube MP allows it to add warmth and fatness to a signal while maintaining exceptionally low-noise and high quality.

ART Dual 15 Band Equalizer (Model 341)
ART's 341 Dual-Channel, 15-band, 2/3-octave graphic equalizer features: constant Q circuitry with a 3% center frequency accuracy, 20mm center detent sliders, selectable boost/cut range of 6dB or 12dB, active balanced and unbalanced input and output connections, internal power supply, and so much more. The rugged, all-steel constructed chassis occupies 1U rack space and is intended for installation in standard 19" equipment racks.

ART S8 8-Channel Microphone Splitter
The ART S8 Microphone Splitter can be used to split eight balanced low impedance microphone signals into sixteen (eight pairs). Each channel of the S8 provides one direct output and one transformer-isolated output from a single microphone.

ART ABY Cool Switch Pedal
A/B-Y switching works two ways. It lets you switch a common source signal (guitar, bass or keyboard) between two amplifiers or amp channels. Or conversely, it lets you switch two source signals (ie, two different guitars) into the same amplifier. A good quality A/B-Y switcher will also provide LEDs or other indicators to show whether A, B or Y routing is in effect. The Y routing combines both the A and B outputs in parallel so that two amplifiers can be driven at once. The Coolswitch provides full A/B-Y switching functionality, plus parallel Common in/out jacks.

ART Digital MPAII Microphone Preamplifier
The all new ART Digital MPA-II delivers all of the same great features of the ProMPA with the added versatility of digital output. Like the ProMPA-II, each input circuit has 48v phantom power and features variable input impedance which can radically vary the overall performance of any high quality dynamic or ribbon microphone. The Digital MPA-II can be configured for dual mono or stereo operation with selectable mid/side mic support, summing the adjacent channel, to decode left/right signals.

ART DeeJayPreII Phono Preamp with RIAA EQ Curve
The DJ PRE II is a high quality phono preamp designed for your home and studio. It acts as an interface between your turntable and your audio recording system. The analog input capacitance can be switched between 100pf and 200pf to optimize your phono cartridge response. A switchable low cut filter removes rumble while leaving the audio pristine. The front gain trim control and signal/clip LED allow you to optimize the preamps gain for a wide range of input sources.

ART DPSII Digital Preamplifier System
Twin high performance discrete preamplifiers with local feedback are coupled with flexible V3(Variable Valve Voicing) 12AX7A gain stage (which delivers both flexibility and consistency in settings) and choice of analog and digital outputs.

ART DTI Hum Eliminator
The DTI (Dual Transformer/Isolater) is a high-quality, totally passive audio interface that uses a pair of high-performance transformers to totally separate input and output signal grounds, thereby isolating two systems and reducing hum and ground-loop noise. The DTI's audio transformers have an extremely flat and wide frequency response and can handle high signal levels while maintaining an isolated balanced output.

ART HeadAmp4 4-Channel Headphone Amplifier
Ideal for virtually any home or project studio, the ARTcessories HeadAmp4 easily adds additional headphone outputs to any mixer, computer audio interface, workstation, iPod, media player or laptop without creating any additional load on the existing headphone source.

ART HeadAMP6 Pro 6-Channel Headphone Amplifier
The ART HeadAMP6 Pro 6 Channel Headphone Amplifier has everything you need in a headphone amp. The HeadAMP6 delivers six independent high-power headphone outputs, each with bass and treble controls with dual function pan/mix control per channel. Along with Stereo aux input for each channel and multiple monitoring settings per channel. Precision eight-segment LED bar graph per channel. Front panel main insert jack. Front- and rear-mounted headphone jacks. XLR and 1/4 inch main inputs and outputs. Parallel main outputs for multiple unit use.

ART HQ231 Dual 31-Band Equalizer with Feedback Finder
The newest member of the HQ Series, HQ 231, features ART's FDC Feedback Detection Circuitry. The ART proprietary FDC differs from similar systems in that it is extremely fast. Although it illuminates the band with the greatest energy with the brightest LED, it doesn't fully discriminate between bands and will not get "stuck" on one band when there is no signal.

ART Phantom I Direct Box with Phantom Power Supply
A 24-volt condenser mic will run perfectly on 48 volts. In fact, mics rated at as little as 9 volts can often operate on 48 volts, but you should check with the manufacturer first. Conversely, a mic will generally perform best driven by not less than its rated voltage so, for a 48-volt mic, you would obtain best results with 48 volts of phantom power. The Phantom I is a great choice for these needs.

ART ProChannell II Microphone Preamplifier and Compressor
The ART Pro Channel II uses second-generation discrete Class-A microphone preamp to provide clean quiet gain while maintaining incredible transparency. A powerful dynamics processor subtly controls transients and noise of the most demanding sources.

ART Pro MPAII Microphone Preamplifier
The new ART ProMPA II is the next generation in affordable high performance microphone preamp technology. Each microphone input circuit, with selectable 48v phantom power, features variable input impedance which can radically vary the overall performance of any high quality dynamic or ribbon microphone. The ProMPA II can be configured for dual mono or stereo operation with selectable mid/side mic support, summing the adjacent channel, to decode left/right signals.

ART Prosplit 2-Way Microphone Splitter
The ProSplit provides one direct output and one transformer isolated output from a single microphone. Applications include sending the direct output to the main or Front-of-House mixer, with the second isolated output being sent to a monitor or recording mixer.

ART Pro VLA II 2-Channel Compressor
The ART Pro-VLA II is a tube driven Vactrol-based Compressor and Leveling amplifier designed to excel in any professional audio application, including tracking, mixing, mastering, live sound or broadcast situations.

ART PS4X4 Dual Metered Power Distribution Unit
Built into the PS 4x4 is a surge and spike protection system, designed to protect powered equipment from harmful electric surges and spikes. The unit also has RFI and EMI filtering, a 15 amp breaker, and a total power capacity of 1800 watts. The PS 4x4 also features a front-located on/off power switch (which lights up when turned on), and a front-mounted circuit breaker reset switch. The rugged, all-steel chassis occupies 1U rack spaces and is intended for installation into standard 19 in. equipment racks.

ART S83WAY 8-Channel Three-Way Microphone Splitter
The S83WAY eight channel three way microphone splitter is ideal for live sound, recording and broadcast applications where microphone and XLR balanced line level input signals have to go to multiple mix locations.

ART SLA1 Power Amplifier (2x100 Watts)
The SLA-1 Studio Linear Amplifier is a robust yet compact power amplifier designed for studio and even live applications. It has been designed and engineered to provide clean, quiet power and excellent sound with ultra-low noise and distortion.

ART SLA2 Power Amplifier (2x200 Watts)
ART's latest amplifier stems from the success of their popular 100-watt SLA-1. For all of you power-hungry audio enthusiasts, ART presents to you the more powerful SLA-2. The SLA-2 is a studio linear power amp that delivers 200 watts of clean, clear power, and will help reproduce your mixes with near-pinpoint accuracy inside a single rack space.

ART SLA4 Studio Linear Amplifier
Offering superb sound quality, the ART SLA4 studio linear power amplifier delivers the clean power you need for any professional audio application including project or professional studio environments or commercial sound installations.

ART SplitCOM Pro Microphone Splitter/Combiner
Use the SPLITCom Pro to Split or Combine balanced low impedance microphone signals. As a Splitter: The SPLITCom Pro provides one direct-coupled output and one isolated output from a single microphone. AS A COMBINER: The SPLITCom Pro provides one output from two microphone inputs.

ART SyncGEN Wordclock and Sample Rate Generator
The ART SyncGen is a simple to use and inexpensive way to improve the sound of your digital recording gear and eliminate seemingly random pops and clicks resulting from synchronization timing errors between different pieces of equipment.

ART T8 8-Channel Transformer/Isolator
The T8 (Transformer Eight) is a totally passive audio interface that uses 8 transformers to separate input and output signal grounds, thereby isolating two systems and reducing hum and ground-loop noise. The T8's audio transformers have flat and wide frequency response and handle high signal levels while maintaining an isolated balanced output. The transformers are wound for 1:1 unity gain and are designed to be used with impedances from 600 ohms to 100k ohms.

ART Tube MP Project Series Microphone Preamp
The Tube MP Project Series is a professional quality audio interface that lets you connect microphone, instrument, and line level signals to a mixer or other audio input. This hybrid design is the latest in a long line of ART tube preamps. They took the legendary Tube MP series and updated every aspect of the design, inside and out, while still maintaining a compact, reliable, and cost effective product.

ART TubeMP USB Microphone Preamp
The Tube MP Project Series is a professional quality audio interface that lets you connect microphone, instrument, and line level signals to audio inputs to digital audio workstations as well as standard analog devices. We took our legendary Tube MP series and updated every aspect of the design, inside and out, while still maintaining a compact, reliable, cost effective product, and added a USB output.

ART Tube MP Studio V3
The Tube MP Studio V3 features ART's new V3 (Variable Valve Voicing) Technology - found only in ART microphone preamplification systems. V3 provides optimized reference points to begin the recording process. The V3 presets were created and fine-tuned by some of the industry's top studio and live-sound engineers, along with a veteran engineering department. V3 allows you to select between a multitude of preamp settings designed for guitars (electric and acoustic), keyboards, bass guitars, drums, vocals, and more.

ART Voice Channel Tube Microphone Preamp System with Digital In/Out
The ART Voice Channel is the answer to your recording and computer audio interface needs. Built to provide the ideal all-in-one input solution for analog or digital recording, the ART VoiceChannel is a true second-generation discrete Class-A microphone preamp capable of providing clean quiet gain while maintaining incredible transparency.

ART ZDirect Passive DI
The Zdirect is a high-quality, totally passive interface that lets you connect instrument-, line-, or speaker-level signals to a mixer or other balanced input through a high-performance audio isolation transformer. The high impedance single-ended 1/4 in. input is converted by the transformer into an isolated balanced low impedance signal source.