CAD AS32 Acousti-Shield 32 Acoustic Enclosure CAD AS32 Acousti-Shield 32 Acoustic Enclosure
The CAD AS32 Acousti-shield reduces reflections, echo and attenuates unwanted environmental acoustic interference. Constructed from a high quality 16 gauge perforated stainless steel shield mated to a 53mm high density micro cell acoustic foam, the AS32 results in a dry recording environment.


IK Multimedia iKlip iPad Microphone Stand Adapter IK Multimedia iKlip iPad Microphone Stand Adapter
IK Multimedia introduces iKlip -- a multi-angle lightweight iPad microphone stand adapter. Now you can take your favorite iPad(TM) music apps on stage for live performance.


IK Multimedia iKlip MINI iPhone and iPod Music Stand Adapter IK Multimedia iKlip MINI iPhone and iPod Music Stand Adapter
The IK Multimedia iKlip MINI is a universal microphone stand adapter for the iPhone and iPod touch to support your iOS device on stage, in the studio, at school or in the office.


K&M 235/1 Stereo Microphone Bar K&M 235/1 Stereo Microphone Bar
Easily mount two mics in one stand. Perfect for use with stereo pairs or for percussion micing. Fits any 5/8-inch - 27 male thread. Made in Germany.


K&M 19720 iPad Clamp-On Microphone Stand Holder K&M 19720 iPad Clamp-On Microphone Stand Holder
Showtime! The K&M 19720 iPad Clamp-On Microphone Stand Holder is clever way to display your iPad. The new connector holds an iPad securely and comfortably. Whether on stage, in the rehearsal room or at home - the strong prismatic element with its ergonomic clamping screw allows the iPad holder to be attached quickly and easily to any tubes from 7 to 30 mm diameter. The iPad is snapped in or out of into holder effortlessly.


On-Stage KSA7575 Universal Microphone Stand Attachment Bar On-Stage KSA7575 Universal Microphone Stand Attachment Bar
Attach this universal adapter to your keyboard stand and make miking your vocals much more within reach! Fits ANY keyboard stand with either 1 in. or 30mm round or square tubing. For use with any standard mic boom, clip or gooseneck. The compact design saves on space, and now there is no need for extra mic stands, leaving more room on the stage


On-Stage MSA5050 Clamp on Cup Holder On-Stage MSA5050 Clamp on Cup Holder
Never knock a drink onto your gear or kick it over on the floor again. This Clamp-On Drink Holder keeps your drink safe and within easy reach while you perform. The attachment piece fits most standard mic stands and booms. The interior is lined with Neoprene rubber to keep your drinks hot/cold and will also prevent condensation from dripping on your equipment.


On-Stage Microphone Stand Carry Bag On-Stage Microphone Stand Carry Bag
The On-Stage Microphone Stand Bag, a must for bands, is a rugged nylon bag with enough pockets for either 3 round base mic stand bases, 3 hex-base mic stand bases or any combination of both.


On-Stage MY500 Stereo Microphone Bar On-Stage MY500 Stereo Microphone Bar
Holds up to three microphones! The On-Stage MY500 is ideal for multiple mic applications in both live and studio recording settings! Fits most standard stands, booms and mic clips. Features brass 5/8-inch - 27 insert threads.


On-Stage MY550 Microphone Extension Attachment Bar On-Stage MY550 Microphone Extension Attachment Bar
A perfect choice for miking drums, cymbals or an acoustic guitar. The On-Stage MY550 attachment bar fits most standard mic stands and booms -- it will even clamp to the side of most amps! The adjustable clamping bracket features a nylon tip for a secure hold without damaging the finish of your equipment! Fits industry standard 5/8 in. - 27 threaded mic clips.


On-Stage MY570 Clamp-On Universal Accessory Holder On-Stage MY570 Clamp-On Universal Accessory Holder
The MY-570 keeps all of your miking accessories within easy reach. This attachment bar fits most standard mic stands and booms - it will even clamp to the side of most amps! The 90-degree attachment piece is perfect for holding your studio headphones, cables, and other musical instruments when not in use.


On-Stage MY700 Stereo Microphone Bar On-Stage MY700 Stereo Microphone Bar
The On-Stage MY700 multi-use stereo mic bar holds up to six microphones with standard 5/8 in. - 27 threaded knobs. With the new angle design, the Stereo Bar can be adjusted between 0 - 45 degrees and is ideal for press conferences, broadcasting and instrument/vocal recording in live or studio environments.


On-Stage QK2B Microphone Clip Quick Release On-Stage QK2B Microphone Clip Quick Release
This is a snap-on, quick-release accessory that provides for instant connection and disconnection of mic holders and boom attachments with standard 5/8 in., 27 threads.


RaXXess Accessory Riser for Amp Handle or Microphone Stand RaXXess Accessory Riser for Amp Handle or Microphone Stand
The AR-5 is a handy little device that mounts under an amplifier handle or on a mic stand. It can act as a third hand or save valuable rack space. Perfect for tuners or other small devices.


Rolls MSC106 Microphone Stand Adapter Rolls MSC106 Microphone Stand Adapter
The new MSC106 microphone stand adapter is perfect for mounting accessories such as headphone amplifiers, 1/2 rack effects, etc.


Rode BoomPole Bag Rode BoomPole Bag
The BoomPole Bag is designed to carry the Boom-Pole (Mini or Standard) with mic (NTG1 or NTG2) and shock mount (SM3 or SM4) attached.


SE Electronics IRF2 Instrument Reflexion Filter 2 SE Electronics IRF2 Instrument Reflexion Filter 2
The SE Electronics Instrument Reflexion Filter 2 is designed on the same principles as its bigger brother the Reflexion Filter and optimized for SDC mics used in instrument and drum recording.


SE Electronics Project Studio Reflexion Filter SE Electronics Project Studio Reflexion Filter
The Project Studio RF uses the same basic design as the Pro version, and while it can never be fully as effective as its more expensive big brother, it easily ouut performs copies and for project studio use is just the job. The metal frame is lined with the same patented polyester fiberboard as the Pro version uses for its outer layer. This material has extremely good acoustic absorption properties; much better than simple foam products. This is then further lined with a high density 'crystal' foam with curved undulations rather the cheaper and less effective ribbed, medium density foams that are widely used by other companies.


SE Electronics Reflexion Filter Pro SE Electronics Reflexion Filter Pro
The Reflexion Filter is basically a portable device for recording live sound sources with reduced room ambience. It is an advanced composite wall which is positioned behind any microphone by means of a variable position stand clamp assembly which ships with the product. The main function is to help obtain a 'dry' vocal or instrument recording.


SE Electronics IRF Instrument Reflexion Filter SE Electronics IRF Instrument Reflexion Filter
The Instrument Reflexion Filter is designed on the same principles as its bigger brother the Reflexion Filter. It forms a small curved wall of punched Aluminium, with 3 layers of polyesther fibreboard separated with air gaps, which helps reduce room ambience and isolates the mic from ambient noise.


SwirlyGig Microphone Stand Drink Holder SwirlyGig Microphone Stand Drink Holder
Built to accommodate most common microphone stands and beverage containers, the stylish SwirlyGig will put and end to the days of trying to find a convenient, yet safe place for your beverage. Discover what million sof people have known for years - convenience is good. Give your drink traction!